Equipe de Atendimento

In short, in a parallel connection we connect positive to positive and negative to negative. This type of connection is generally used between speakers (both single and dual voice coil) and even wi...

High Voltage Amplifiers from the T Series (KW):T10.0KW – maximum voltage: 140 VDCT20.5KW – maximum voltage: 205 VDCT30.0KW – maximum voltage: 225 VDCT35.0KW – maximum voltage: 240 VDCT40.0KW – 1 oh...

High Voltage Amplifiers from the T Series (KW):T10.0KW – minimum voltage: 40 VDC – minimum of 4 batteries in series.T20.5KW – minimum voltage: 100 VDC – minimum of 10 batteries in series.T30.0KW – ...

Simply put, the word “bridge” in this case means the combination of the amplifier’s output channels. Example: Using a TS 800x4, which is a 4-channel amplifier, with each channel delivering 200W RMS...

For this topic, let’s consider a 4-channel amplifier, which usually has one RCA input for each channel, such as the Taramps TS 400x4, for example. In this project, we will be using 1 pair of speake...

To synchronize one or more remote controls to the Taramps audio mixer player, follow these steps: With the mixer turned off, press and hold the mixer’s ON/OFF button for approximately 10 seconds un...

A simple way to identify the number of batteries needed for a car audio project is to add the RMS power of the Class D amplifiers and divide by 20.The number 20 is an approximate value determined b...

For sizing the power supplies for the system, we use a simple calculation. In this example, we have a project with 1 MD5000.1 and 1 MD3000, totaling 8,000 WRMS of amplifier power, which would requi...

In our Audio Mixers PLAYER, it is possible to activate the REPEAT function, which can be configured to repeat, for example: an entire folder, a single song, the entire USB drive/flash drive, or eve...

By default, our Smart Charger power supplies automatically adjust their output voltage according to the battery’s needs. However, you can configure them to operate with a fixed voltage through a si...